CreatBot F430 3D Printer the first one to publish 400°C high temperature nozzle to 3d printer market. F430 equiped with dual extruders and this kind of extruder allow to print with a variety of filaments. The nozzles height can also be micro adjusted and a build volume of 400*300*300mm FREE QUOTES AVAILABLE
Exclusively research and develop the extruder feeding system,which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 5 years and more than 8000 hours.
Fully enclosed chamber can block all external interference and reduce noise. Hot chamber can provide constant room temperature so that model won’t deform when printing.
The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue print from where it stopped after power’s on. The printer will avoid invalid printing by stoping print and warning when filament runs out.
The printer have all-English-menu touch screen, easy operation and friendly use. One key to warm,one key to print as well as many other shortcut keys.
The hotbed is made of heatable aluminium PCB, which can be heat up to 130°C fast. The platform is attached with 3d printing stickers buildtak. Printed object can be stick on the buildtak tightly and won’t get deformed.
The hotbed is attached with a carbon fiber panel, which allows to transfer heat fast. The carbon fiber panel are removable, and you can bend panel with both hands and get object easily.
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space. FREE QUOTES AVAILABLE
Please Note 2 weeks order delay.
Print Technolody: Fused Deposition Modeling
Build Volume: 400*300*300mm (F430)
Number of Nozzles: Double
Layer Resolution: 0.02mm
Filament Diameter: 1.75mm
Filament Compatibility: PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
Nozzle Diameter: 0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)
Print File Type: GCO, GCODE
Ambient Operating Temperature: 15-32°C
Max. Nozzle Temperature: 400°C
Max. Bed Temperature: 130°C
Max. Cabinet Temperature: 70°C
Best Printing speed: 55mm/s
Max. Printing speed: 180mm/s
Max. traveling speed: 200mm/s
Construction: Power-Coated Steel, Aluminum Casting for Motion Components, POM
Build Plate: Heatable Aluminium PCB with BuildTak
Build Plate Leveling: Automatic
Extruder: Directly Drive
Stepper Motors: 1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision: 12.7 Microns
Z Positioning Precision: 1.25 Microns
Power Requirements: 100-240V, 50-60Hz
Max. Power: 300W
Screen: 4.3" Touch Screen
Control Chip: ATmega 2560
Storage Media: USB Disk
Software Bundle: CreatWare Multi-language
Supported File Types: STL, OBJ, AMF
Operating Systems: Windows (7,8,10), Mac OS X
Outage Restored: Sava data when power is off
Filament Detection: Pause printing when filament run out
Automatic Shut-down: Turn off the power automatically when printing is complete
SIZE & WEIGHT
Product Dimensions & Weight: 660*470*580mm 43Kg
Packing Size & Weight: 760*620*680mm 58Kg