Daylight Precision Hard - White

Daylight Precision Hard - White

$229.00
Product Code: Hard White
Stock Instock

Overview

Daylight Precision Hard - WhiteDaylight Precision Hard White resin has been created to produce highly strong, precise parts on the LC Precision Printer range along with a clean white colour. The printed parts will exhibit exceptional tensile strength...

Daylight Precision Hard - White

Daylight Precision Hard White resin has been created to produce highly strong, precise parts on the LC Precision Printer range along with a clean white colour. The printed parts will exhibit exceptional tensile strength and elongation comparable to that of acrylic and polyimide. The rigid parts produced show minimal shrinkage possible along with great accuracy. The resin is water and soap washable, so no need for IPA and will provide a dry surface finish after post exposure.

Compatible with Liquid Crystal Precision and Precision 1.5

Size: 1kg

Technical Data

Colour: White

Viscosity 980 cPs (At 25ºC Brookfield spindle 3)

Hardness 94 Shore D ASTM D2240 (After post exposure)

Tensile strength 80 MPa ASTM D638 (Postcured 120 mins UV and 80°C heat)

Elongation at break 5.6% ASTM D638 (Postcured 120 mins UV and 80°C heat)

Storage 10<t>50°C

Density 1.09 g/cm3

Processing Instructions

Follow the procedures laid out in your 3D Liquid Crystal user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. The object should be post cured under UV in water to remove any surface tack, followed by UV light at 80 °C for minimum of 1 hour to obtain the maximum tensile properties.

Write a review

Note: HTML is not translated!

Rating Bad           Good
Captcha

Related Products