CreatBot F430

CreatBot F430

$6,899.00
Brand: Creatbot
Product Code: CBOT F430
Stock Instock

The CreatBot F430 3D printer is the first desktop printer to use a 400°C high-temperature nozzle. The F430 is equipped with dual extruders which can print with a variety of filaments. The nozzles’ height can also be micro adjusted and the printer has a build volume of 400mm x 300mm x 300mm.

CreatBot F430 3D Printer Support 400°C Hotend
The CreatBot F430 3D printer is the first desktop printer to use a 400°C high-temperature nozzle. The F430 is equipped with dual extruders which can print with a variety of filaments. The nozzles’ height can also be micro adjusted and the printer has a build volume of 400mm x 300mm x 300mm.

High precision and high speed
The extruder feeding system supports high-speed printing. The high-speed will not affect the filament and it will extrude steadily without blocking. The printing is also highly accurate with a 0.04mm print resolution.

Stability
The printer’s steel body not only ensures its stability when printing but also extends its usage period greatly. The first batch of CreatBot 3D printers has been working for 5 years and over 8000 hours.

Fully enclosed high-temperature chamber
The fully enclosed chamber can block all external interference and reduce noise. The hot chamber can remain at room temperature so that the model won’t deform while printing.

Power outage restored and filament detection
The printer will automatically memorise the current position and save print data if there is a power outage. It will continue to print from where it stopped once the power comes back on. The printer will avoid invalid printing by stopping the printing process when the filament runs out.

Touchscreen
The printer has an English menu touchscreen which is easy to operate. There is one key to warm the printer up, one key to print and many other shortcut keys.

130°C hotbed
The hotbed is made of heatable aluminium PCB, which can heat up to 130°C. The platform is attached using 3D printing stickers called buildtak. Printed objects can be stuck on the buildtak tightly and won’t become deformed.

Removable panel
The hotbed is attached to the printer with a carbon fibre panel, which allows heat to transfer fast. The carbon fibre panel is removable and you can bend the panel with both hands and get your 3D object out easily.

Air filter system
The air filter system can absorb impurities and gases that are generated by printing special filament. This gives the environment that the printer is located protection which means it is suitable for use in the home, school or office space.

Please note there is a two-week order delay.

Write a review

Note: HTML is not translated!

Rating Bad           Good

Printing
Print technology: Fused Deposition Modeling
Build volume: 400mm x 300mm x 300mm (F430)
Number of nozzles: Double
Resolution: 0.04mm
Layer resolution: 0.02mm
Filament diameter: 1.75mm
Filament compatibility: PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
Nozzle diameter: 0.4mm (0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm)
Print file type: GCO, GCODE

Temperature
Operating temperature: 15°C - 32°C
Max. nozzle temperature: 400°C
Max. bed temperature: 130°C
Max. cabinet temperature: 70°C

Speed
Best printing speed: 55mm/s
Max. printing speed: 180mm/s
Max. traveling speed: 200mm/s

Mechanical
Construction: Power-coated steel, aluminium casting for motion components, POM
Build plate: Heatable aluminium PCB with buildtak
Build plate levelling: Automatic
Extruder: Directly drive
Stepper motors: 1.8° step angle with 1/16 micro-stepping
X Y positioning precision: 12.7 microns
Z positioning precision: 1.25 microns

Electrical
Power requirements: 100-240V, 50-60Hz
Max. power: 300W
Screen: 4.3" touchscreen
Control chip: ATmega 2560
Storage media: USB disk
Connectivity: USB

Software
Software bundle: CreatWare multi-language
Supported file types: STL, OBJ, AMF
Operating systems: Windows (7,8,10), Mac OS X

Special functions
Outage restored: Sava data when power is off
Filament detection: Pause printing when filament run out
Automatic shut-down: Turn off the power automatically when printing is complete

Size and weight
Product dimensions and weight: 660mm x 470mm x 580mm, 43kg
Packing size and weight: 760mm x 620mm x 680m, 58kg

Related Products

CreatBot DM

CreatBot DM

$2,989.00
CreatBot DX

CreatBot DX

$3,499.00
CreatBot DX Plus

CreatBot DX Plus

$4,999.00
CreatBot DE

CreatBot DE

$4,944.00
CreatBot DE Plus

CreatBot DE Plus

$7,699.00
CreatBot D600

CreatBot D600

$15,999.00